Thrust Table MN3110 - Tiger 13*4.5

Info and Discussion about the ESC32 hardware and software

Thrust Table MN3110 - Tiger 13*4.5

Postby chschmid » Fri Dec 27, 2013 6:01 pm

Did somebody already calibrate for MN3110 - 700 with Tiger 13*45 @ 4s.
A thrust table would be nice too.

Cheers
Christof
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: Thrust Table MN3110 - Tiger 13*4.5

Postby JussiH » Fri Dec 27, 2013 7:48 pm

Im pretty sure that 13 inch with a 700kv is not very ideal. I tried a eprop 1260 with those and motor got warm

The 1145 tiger is ideal, any larger and you will need the 480kv version imho
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm

Re: Thrust Table MN3110 - Tiger 13*4.5

Postby chschmid » Fri Dec 27, 2013 8:11 pm

Hi Jussi

Thanks for the hint. Ecalc says, the Combo is not to bad.
BTW I tried to order an ESC32 from you (for calibration ect) but I can not select a shipping and therefore not place the order.

Cheers
Christof
Attachments
ecalc Octo 13-45 with payload.JPG
ecalc Octo 13-45..JPG
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: Thrust Table MN3110 - Tiger 13*4.5

Postby rwijnhov » Mon Dec 30, 2013 6:01 pm

Jussih did you ever test the 400kv with a 15 x5 prop on 4s? I
rwijnhov
 
Posts: 219
Joined: Mon Jul 16, 2012 3:42 pm

Re: Thrust Table MN3110 - Tiger 13*4.5

Postby JussiH » Mon Dec 30, 2013 6:18 pm

No, sorry.
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm


Return to ESC32

Who is online

Users browsing this forum: No registered users and 15 guests

cron