Greetings,
Max mentioned that I should start a new thread on this, so here it is. I have an old 32 bit XP machine in the workshop that gets used for 99% of all my multi-rotor stuff, and the only version of the GCS that I've ever been able to get to connect to the ESC32 is 1.0.5. Up until today, I just assumed that the newer versions didn't work for anyone, but I just tried a Win7 and Win8 machine, and they both worked fine.
Should the newer GCS versions (1.2.X and 1.3.X) work with 1.4.3 firmware on the ESC32 when using an XP computer? Since 1.0.5 does work, I can't see how there could be a problem with the hardware, since I'm using the exact same setup for all the tests. The FTDI adapter does have a high port number of 28 on that machine, which I know can be a problem for some programs. The port number happened to be 5 on the Win7 and Win8 machines.
Thanks,
Rusty