ESC32 settings stay blank

[Astudillo]

Hi Guy's

Just got my Esc32's in, and i tried to connected them to my computer with the flyduino dongle. I can arm and disarm my esc32 but al the setting parameters stay blank.

i tried to read the config,load default, reload default. And i even typed over the settings and used write config.
But nothing seems to have any impact, if i restart my qgroundcontroller and try to read out the settings they stay blank.
I tried this with multiple esc32's and on 2 different computers a mac and a windows machine.

I also flashed the firmware to(1.4.1 Build 5251).

Does anyone know what im doing wrong?

[lsbs]

Hallo,

if you use the AQGCS 1.20 or 1.21 Version you need the ESC32 1.43 Firmware.

In our neighboring forum I opened a thread about this.Sorry its in German.
Sorry I can´t post the links cause of "New User..."
Okay you can look under FPV-Community.de . Post at AQ Forum "Keine Einstellungen ESC32 in QGC1.2.0 möglich?."
The 1.43 FW is not public available on the AQ Homepage, I don´t know why.
Yups tried to compile the ESC 1.43 Scoure Code
use on your own risk.
This FW shout work with the newest AQGCS Software, I try it in a few days....

DIDI

[Astudillo]

Hi Didi,

Tanks for the info, ill check out the FPV-Community.de!

Astudillo

[chschmid]

You can use QGC 1.0.5 and ESC32 FW 1.4.1. That works.