Hi.
Have anyone tried to add i2c capability to ESC32?
I know some guys are trying CAN capability, but, i2c is good because it does not need transceiver anyway.
I'll try to implement i2c, but before I'm doing this, it would be good to know if someone already did this.
i2c thing
24 posts
• Page 1 of 3 • 1, 2, 3
Re: i2c thing
by Kisssys » Tue Apr 23, 2013 3:03 am
Their was some code written but it had problems and was never finished. Maybe Jussi still has it.
Steve
Kisssys
Kisssys
- Kisssys
- Posts: 1340
- Joined: Sat Jun 23, 2012 9:23 pm
Re: i2c thing
by kinderkram » Tue Apr 23, 2013 8:01 am
I only can provide the hex file I tested.
- Attachments
-
esc32v2-I2C.zip- I2C version of ESC32 firmware
- (49.34 KiB) Downloaded 760 times
- kinderkram
- Posts: 2911
- Joined: Fri Jun 22, 2012 7:47 am
Re: i2c thing
by hyonlim » Tue Apr 23, 2013 9:39 am
So, why do you provide only hex file?
Kind of weird thing.
Kind of weird thing.
- hyonlim
- Posts: 15
- Joined: Wed Apr 17, 2013 12:56 pm
Re: i2c thing
by kinderkram » Tue Apr 23, 2013 10:29 pm
Here you are...
- Attachments
-
- ESC32-source-code-I2C.zip
- (241.09 KiB) Downloaded 768 times
- kinderkram
- Posts: 2911
- Joined: Fri Jun 22, 2012 7:47 am
Re: i2c thing
by JussiH » Thu Apr 25, 2013 10:15 am
Just a note on this.
The code that victor wrote is for one of the first publicly released ESC firmwares. Lots of changes has happened since - so it would be necessary to start with the current trunk and go from there.
Thanks for looking into this.
The code that victor wrote is for one of the first publicly released ESC firmwares. Lots of changes has happened since - so it would be necessary to start with the current trunk and go from there.
Thanks for looking into this.
- JussiH
- Posts: 2103
- Joined: Thu Jun 21, 2012 9:25 pm
24 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 5 guests