Page 26 of 31
Re: ESC32 Q&A
Posted:
Sun Feb 01, 2015 10:01 am
by Crizz
thx @ Joerg, i´ll compare with my actual values and will even do tests. I´m surprised to read about so many problems with the pancake series from T-Motors, guess next time i´m gonna ask for working and proofed combinations instead of only trusting in experience with other series.
Re: ESC32 Q&A
Posted:
Sun Feb 01, 2015 10:42 am
by DUKE40
Hi Crizz,
I am surprised as well, that motors from such a well known company are making such problems.
I would have expected like you, that they work correctly in almost any combination, but life shows that theory and reality can be quite far away from each other.
Hope you will manage to get your configuration working, would be a pitty if your big AQ project could not be a success only due to the motors.
Re: ESC32 Q&A
Posted:
Sun Feb 01, 2015 6:48 pm
by Crizz
Like i already wrote in my other request for calib-file : spent my sunday with the x8 and it drives me nuts. Will try 12x4 instead, if they also dont run satisfying, i have to reconsider to replace motors or ESC - both variants means lotta work and a whole bunch of money. This project is becomming a money-grave itself......
Re: ESC32 Q&A
Posted:
Mon Mar 16, 2015 4:04 pm
by Sparkles
Any timeline update for the esc32v3? I'm having trouble finding any news on its development. Any plans to release it in the coming months?
Re: ESC32 Q&A
Posted:
Tue Mar 17, 2015 9:36 am
by JussiH
A new batch of V3´s is in progress, and if it checks out, we will make it available in a public beta as soon as possible. Most likely that will be after Easter
Re: ESC32 Q&A
Posted:
Sun Mar 22, 2015 5:18 pm
by cctsao1008
Does the ESC32 support oneshot125?
Re: ESC32 Q&A
Posted:
Sun Mar 22, 2015 6:26 pm
by kinderkram
Re: ESC32 Q&A
Posted:
Thu Mar 26, 2015 5:19 pm
by cctsao1008
do you going to plane to move your code base to github?
Re: ESC32 Q&A
Posted:
Thu Mar 26, 2015 6:17 pm
by aBUGSworstnightmare
Re: ESC32 Q&A
Posted:
Sat Jun 27, 2015 6:59 pm
by Georgseema
I'm planning to build a line following robot with brushless gimbal motors. I would like to know if gimbal motors would be a problem for ESC32, because of their high resistance (5-15Ω)?