Just started with AQ on following frame:
- frame from Flyduino: http://flyduino.net/Quadrocopter-Frame-Set-25cm-arm
- motor-to-motor distance =530mm
- Motor: T-motor MT2212-16
- ESC32
-Radio system: FUTABA FP8, Rx = FUTABA R6208SB + signal inverter from MK shop
- Props 10x4.5 from flyduino: http://flyduino.net/10x45-GF-reinforced ... Set-orange
Total weight = 650g without batery; using 2200mA batery weigth = 850g
Flight time on hovering = 17 min
NOTE. This combination supply the best performance I´ve got in any quad. For instance, using HK ESC´s (like Turnigy-plush) and standard motors I can´t hover more than 12 min.
A video of the maiden flight here:
Some images below.
Angel