'Eve of New Year'
Posted: Sat Dec 31, 2016 2:36 pm
She's not fully configured yet but 'Eve of New Year' is 95% ready...
Angel, thanks again for the 3D printed parts! Will add more info when she had her maiden flight.
HAPPY NEW YEAR TO ALL OF YOU!
EDIT! Some more info on the craft:
Motors: 3DR x8+ motors --> so these are either T-Motor AS2216-11 Kv880 (that's what I assume) or SunnySky X2216-880
Props: aeronaut CamCarbon light 11x4.5
ESC32V2 connected via CAN to an M4r6
Find all related parameters/files below. Will add more pictures/update the file after maiden flight.
This is what the top center plate looks like. Bottom has a little different shape since holes for dampeners were omitted. In case somebody wants to have the .dxf-files just let me know.
Joerg
aBUGSworstnightmare
Angel, thanks again for the 3D printed parts! Will add more info when she had her maiden flight.
HAPPY NEW YEAR TO ALL OF YOU!
EDIT! Some more info on the craft:
Motors: 3DR x8+ motors --> so these are either T-Motor AS2216-11 Kv880 (that's what I assume) or SunnySky X2216-880
Props: aeronaut CamCarbon light 11x4.5
ESC32V2 connected via CAN to an M4r6
Find all related parameters/files below. Will add more pictures/update the file after maiden flight.
- closedloop_ESC32v2_v6180_3drx8p_4s_aero11x45_result.txt
- ESC32V2 calibration data for 3DRx8p motor with aeronaut CamCarbon light 11x4.5
- (349 Bytes) Downloaded 930 times
- Value to Thrust poly calc v2_3drx8p_4s_aero11x45.zip
- Thrust values and QUATOS parameters calculation
- (12.7 KiB) Downloaded 941 times
- M4Q454.pdf
- 3D frame visualisation of the quatos.xml file
- (43.31 KiB) Downloaded 998 times
- M4Q454.xml
- QUATOS .xml file of the craft
- (11.74 KiB) Downloaded 938 times
This is what the top center plate looks like. Bottom has a little different shape since holes for dampeners were omitted. In case somebody wants to have the .dxf-files just let me know.
Joerg
aBUGSworstnightmare