AutoQuad Forum

Q15 build : a hi-performance 400mm quad

This is my new build of a medium size quad (430mm mtm) trying to get the best out of AQ. I call Q15 for refference.

I´ve designed and buid a new central plate to let space to the ESC32V3 attachment, the M4/N4 and mainly to get higher stiffness (classical warthox plate is too flexible).

Arms are 16-14mm tube. End fittings are 3D printed in ABS-CarbonFiber as usual.

MOTORS: TMotor MN2212-21 kv780 v2
PROPELLERS: TM carbon 10x3.3
ESC32V3 from iRC
M4v2/N4. Using fw "Feature Integration" r1923 - QUATOS
Radio FrSKY: Tx: HORUS, Rx:X4R with telemetry

It flies incredibly well. Super precise yet smooth: this´s my favourite machine now!
I share all this design, parameters, etc. Please ask me.

I´ll add also the build process in this post.

Enjoy

PD.I have several plates available, if someone is interested.

Hi Angel

Super clean build and many cool details. Congrats and thanks for sharing.
A short vid would be great as well.

Cheers
Christof

Thanks Christoff.
I´ll do a video flying soon showing the performance.
Angel

Hi Angel,

really nice one! Like the clean build.
Will 11in props fit on this craft? I have some 3DR Iris motors lying around here which perform quite well @ 4S (http://fpv-community.de/showthread.php? ... s-(ESC32V2)) (should be 2216-12 800kV) - still not decided what to use them for...

Joerg

Hi Joerg:
yes: 11 inch props will fit in. I can send you a set of plates if you want to build one.
Angel

Attached a build photo-guide
Angel

Video with flight test: https://youtu.be/O7l1XW8VJRg
Enjoy

Nice flight! Looking very steady and precise. Congrats!

-Max