New QUAD 430mm with M4/N4 - ESC32V3

Show us your flight videos and pictures of your aircrafts

'Eve of New Year'

Postby aBUGSworstnightmare » Sat Dec 31, 2016 2:36 pm

She's not fully configured yet but 'Eve of New Year' is 95% ready...
P_20161231_142944.jpg

P_20161231_143000.jpg


Angel, thanks again for the 3D printed parts! Will add more info when she had her maiden flight.

HAPPY NEW YEAR TO ALL OF YOU!

EDIT! Some more info on the craft:
Motors: 3DR x8+ motors --> so these are either T-Motor AS2216-11 Kv880 (that's what I assume) or SunnySky X2216-880
Props: aeronaut CamCarbon light 11x4.5
ESC32V2 connected via CAN to an M4r6

Find all related parameters/files below. Will add more pictures/update the file after maiden flight.
closedloop_ESC32v2_v6180_3drx8p_4s_aero11x45_result.txt
ESC32V2 calibration data for 3DRx8p motor with aeronaut CamCarbon light 11x4.5
(349 Bytes) Downloaded 33 times

Value to Thrust poly calc v2_3drx8p_4s_aero11x45.zip
Thrust values and QUATOS parameters calculation
(12.7 KiB) Downloaded 30 times

M4Q454.pdf
3D frame visualisation of the quatos.xml file
(43.31 KiB) Downloaded 35 times

M4Q454.xml
QUATOS .xml file of the craft
(11.74 KiB) Downloaded 31 times

This is what the top center plate looks like. Bottom has a little different shape since holes for dampeners were omitted. In case somebody wants to have the .dxf-files just let me know.
center_top_0r3.jpg
Top center plate - 2mm GFK


Joerg
aBUGSworstnightmare
Last edited by aBUGSworstnightmare on Mon Jan 02, 2017 2:16 pm, edited 3 times in total.
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Re: New QUAD 430mm with M4/N4 - ESC32V3

Postby afernan » Mon Jan 02, 2017 10:00 am

Hi Joerg!:

Happy nu year also for you!.

Very nice look of your machine. Looking forward for more images when finished. In my case it flies very very well. I can share my params if you need.

I hope this year will bring to AQ a lot a new things!

Angel
afernan
 
Posts: 1214
Joined: Sat Jul 07, 2012 5:24 pm
Location: Madrid, Spain

Re: New QUAD 430mm with M4/N4 - ESC32V3

Postby aBUGSworstnightmare » Mon Jan 02, 2017 2:03 pm

Added related files to my last post.
Basically all parameters are there; will have to flash the firmware, adjust settings and she's ready to be flown. Let's see how good my .xml-file and the thrust curve measueremt is...
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Previous

Return to AQ Media Showcase

Who is online

Users browsing this forum: No registered users and 2 guests