Page 1 of 1

Q9 - QUAD 520 QUATOS ESC32V3

PostPosted: Sun Aug 30, 2015 8:34 pm
by afernan
I want to show you my last build. This is a mid size quad using all last AQ developments onboard. I call "Q9".

The frame is full custom 3DPrinted parts, large diameters CF tube arms (25mm) all dimensioned for ultra-low vibration levels < 0.5m/s2, (no damping system used).
Main components are:
- AQ 6.1, DIMU 1.1 Quatos with r449
- ESC32V3 with v3.3.0
- Propulsion: MN3508 with TM1240

Performance in flight are very, very good. Super smooth flight mainly thanks to the low vibs level. Flight time are close to 30min with LiOn 6000mA,4S . PH uses 40watt, see images below only.

As usual I can share the files to print for any autoquader.
Enjoy
Angel

Re: New build QUAD 520 QUATOS ESC32V3

PostPosted: Sun Aug 30, 2015 9:41 pm
by brat002
Amazing as usually. Please share files :)

Re: New build QUAD 520 QUATOS ESC32V3

PostPosted: Sun Aug 30, 2015 9:43 pm
by brat002
And what is KV of these motors?

Re: New build QUAD 520 QUATOS ESC32V3

PostPosted: Sun Aug 30, 2015 9:56 pm
by afernan
700kV. This combination MN3508 and TM1240 works very well and effitiently (only 40watt for hovering).

Please send me a PM with your Email to share the stl files for printing (canĀ“t attach large files there)