Q9 - QUAD 520 QUATOS ESC32V3
Posted: Sun Aug 30, 2015 8:34 pm
I want to show you my last build. This is a mid size quad using all last AQ developments onboard. I call "Q9".
The frame is full custom 3DPrinted parts, large diameters CF tube arms (25mm) all dimensioned for ultra-low vibration levels < 0.5m/s2, (no damping system used).
Main components are:
- AQ 6.1, DIMU 1.1 Quatos with r449
- ESC32V3 with v3.3.0
- Propulsion: MN3508 with TM1240
Performance in flight are very, very good. Super smooth flight mainly thanks to the low vibs level. Flight time are close to 30min with LiOn 6000mA,4S . PH uses 40watt, see images below only.
As usual I can share the files to print for any autoquader.
Enjoy
Angel
The frame is full custom 3DPrinted parts, large diameters CF tube arms (25mm) all dimensioned for ultra-low vibration levels < 0.5m/s2, (no damping system used).
Main components are:
- AQ 6.1, DIMU 1.1 Quatos with r449
- ESC32V3 with v3.3.0
- Propulsion: MN3508 with TM1240
Performance in flight are very, very good. Super smooth flight mainly thanks to the low vibs level. Flight time are close to 30min with LiOn 6000mA,4S . PH uses 40watt, see images below only.
As usual I can share the files to print for any autoquader.
Enjoy
Angel