AutoQuad Forum

Leopold, good to hear that.

I dont know how far out in the arms your KISS are, i mounted them on a second build direct under the motors and had to ad a capacitor and a shieldet signalwire to each of them to work propper without any glitches.

After some uncontrolable vibes and suggestions from Afernan I'm doing a major upgrade on this build. Four ESC32 are going to be installed.

Concerning hookup of the ESC's, do I need to power the esc's seperatly so that I can power logic and AQ before I power motors? Or is it ok that everything is powered at the same time when I connect the battery?

its OK when alls components are powered the same time.

I skipped the ESC32 and turned bck to KISS and changed the frame.
The full story is here:


Meanwhile this is my firts test with DYS 3 axis gimbal and gopro3.
It was windy but video is quite ok.

very nice Leopold
hearing the motor sound i would mention to lower TRD a little, just to give it a try

Thanks, will do.
Is now at 12000.

At what certain times do you heat the problemen? Maybe it is because I switched to PH a couple of times.

i heared it the most time in the video, aim for somethig around 6-8000 and give it a try, should run smoother than.