Hi Angel,
thanks for sharing your ESC32 settings!
When looking at the data I figured out you've calibrated for Startup Mode 1 (Closed Loop RPM). Does it make any difference when calibrating the ESC32 which startup mode is selected?
Made a new run with my eProps with Closed Loop RPM which gives me different values (will upload later; need to copy the data from my workbench PC first)
@all: made some calibration runs with the RC-Timer CFK props. Although properly calibrated it looks like the Tarot doesn't like them! Using QGC to accelerate the motor from low RPR (ARM-->START-->motor runs at low RPM) to max RPM (calibrated to 6500) lets the motor loose sync on each attempt (smarter changes were no problem).
In comparison, when mounting the eProp (correspondent calib-data loaded) it speeds up from low-rpm to 7200 rpm without problems (each time).
CONCLUSION: Although the RC-Timer offers some advantages in weight they need more power (can see the same as reported by Angel) and even run at lower max-rpm --> will not use them and try to sell them off!
Joerg