I got interested in AutoQuad sometime during spring this year and soon bought the board together with six ESC32's. I managed to design some mounts for the ESC32's quite fast but then brushless gimbal frenzy hit the world and I spent practically whole summer tinkering with Panasonic GH2 to Canon 5Dmk3 -sized brushless gimbals. Now that the hype seems to calm down little by little I have finally some time to continue building the hex. I don't have many pictures of the aircraft but since I have asked many question in this forum I decided to share with you some details of the build. I'll update this thread little by little as final stages of the build progress towards first test flights. All the pictures are from Instagram so pardon the artsy-fartsy feel.
Ok, first thing to do was design some kind of mount for the ESC32's. I first thought mounting them to center frame but reading about electrical interference and such finally decided to mount them close to motors. I ordered some (really over the top) heatsinks from eBay together with some additional capacitors to handle the longer battery wires. Then I designed & 3D printerd a mount for the package. ESC32 + two heat sinks + three caps neatly in a "wind tunnel" mount.
Caps are missing from the picture and they will sit under the ESC on those half round recesses.