Page 11 of 16
Re: Let's show it off!
Posted:
Sat Jun 08, 2013 6:50 am
by chschmid
Re: Let's show it off!
Posted:
Sat Jun 08, 2013 10:36 am
by kinderkram
Just wanted to say
THANK YOU to everyone contributing their videos!
It's been a great pleasure collecting all those goodies over the last 4 months.
They're over 120 videos in my play lists - that makes roughly
a video a day.
So ... just keep them coming!
- yt-aq-playlists.jpg (262.39 KiB) Viewed 265670 times
.
Re: Let's show it off!
Posted:
Sat Jun 08, 2013 11:39 am
by teramax
nice Mr. kinderkram
i sometimes find time to watch them again just to remind the beginnings.
They are very entertaining , educational and hm......... funny too.
Re: Let's show it off!
Posted:
Fri Jun 21, 2013 7:52 am
by kraldmark
Awesome! I want to design my playlists like this.
Re: Let's show it off!
Posted:
Fri Jun 21, 2013 9:21 am
by afernan
About "thermoformable" CFRP. I guess it´s a kind of "prepared" CF plate in a semi-cured state.
As you may know, all industrial CFRP uses "pre-preg" (pre-impregnated) CFRP (I work designing space structures in ASTRIUM-Spain).
A pre-preg is a laminate of CF+Resing (with already the right percentage) not yet cured, that has a "tacking" surface so you can form it (similar that Scotch Tape tacking) before curing process. It´s a very easy and clean method.
Normally you need autoclave for curing (pressure & temperature) but today there are new resins that dont need high curing temperatures, or even they can be cured with UV light at 20ºC. The fact of the pressure it´s a cuestion of compactation and air bubbles elimination, it´s always required for industrial application but It can be avoided for "home" process.
So, you can buy prepregs and DIY at home. I did it many times using a home made vacuum machine (for the vacuum bag) and hot applied with a electric blanket. (I confess that now I prefer to buy those chinesse CF plates on HK)
Angel
Re: Let's show it off!
Posted:
Fri Jun 28, 2013 7:22 pm
by leopold1
Re: Let's show it off!
Posted:
Tue Aug 27, 2013 7:15 am
by Cecil
I would like to see a mission if possible: Takeoff, rise 1 m vertically, pause 30 seconds, Move to the left 1 m, pause 30 seconds, rise a further 1m, pause 30 seconds, move to the right 1m , pause 30 seconds and go back the same way to home. That type of mission should show how good a AQ6 is. If 1m is too small a distance then 2metres.
It would be good also to see it in gentle wind conditions.
Re: Let's show it off!
Posted:
Tue Aug 27, 2013 7:56 pm
by LPR
Cecil
I can give some of my old videos that show some of the AQ ability,
https://www.youtube.com/watch?v=0EEHdLEadEQhttps://www.youtube.com/watch?v=YwYjOIZDnM4This page will show how the AQ project has progressed.
http://autoquad.org/news/Here some videos that Norbert put together.
http://www.youtube.com/user/MrKinderkra ... st&sort=daLarry
Re: Let's show it off!
Posted:
Tue Aug 27, 2013 8:13 pm
by chschmid
Just great to see your vids again.
Cheers
Christof
Re: Let's show it off!
Posted:
Wed Sep 04, 2013 3:02 am
by Cecil
I would still like to see this mission.
" Takeoff, rise 1 m vertically, pause 30 seconds, Move to the left 1 m, pause 30 seconds, rise a further 1m, pause 30 seconds, move to the right 1m , pause 30 seconds and go back the same way to home. That type of mission should show how good a AQ6 is. If 1m is too small a distance then 2metres.
It would be good also to see it in gentle wind conditions."
I live in an area with a large number of trees etc.