Page 1 of 7
TK4 - Build
Posted:
Thu Nov 22, 2012 9:31 pmby hoppel
Hello,
currently i build a Quad for a Customer. Here is a preview.
Hardware: Autoquad
Motor: Plettenberg
The Autoquad PCB will be modified for work with 5s LiPo's.
The frame is complete in Carbon with removable arms. The connecter
contains also the plugs for LED's.
A Camera mount is also in work.
Greets,
Andrew from Berlin
- IMG_2817.JPG (42.52 KiB) Viewed 13829 times
- IMG_2818.JPG (46.32 KiB) Viewed 13829 times
- IMG_2819.JPG (45.12 KiB) Viewed 13829 times
- IMG_2820.JPG (65.46 KiB) Viewed 13829 times
- IMG_2821.JPG (57.91 KiB) Viewed 13829 times
- IMG_2822.JPG (36.64 KiB) Viewed 13829 times
- IMG_2823.JPG (33.27 KiB) Viewed 13829 times
Re: TQ4 - Build
Posted:
Thu Nov 22, 2012 10:09 pmby chschmid
Wow
Nice cleaen build. I love your connectors. Is that custom? What about the arm clamps/holders? What product is this?
Best
Christof
Re: TQ4 - Build
Posted:
Fri Nov 23, 2012 8:19 amby ThinMan
Hello!
Sorry for my english.
This is my Quad and the construction ist complete from me. The connectors are 3D-printed.
The right name of this Copter is ThinKopter TK 4. I planned a Y-Okto with same connectors.
The weight of the Quadro is ca. 1400 gramms.
ThinMan
Re: TQ4 - Build
Posted:
Fri Nov 23, 2012 9:20 amby ThinMan
The weight of the frame without motors, cables and electronics is 670 gramms with steelscrews.
It is very stable.
ThinMan
Re: TQ4 - Build
Posted:
Fri Nov 23, 2012 10:04 amby kinderkram
Welcome hoppel and ThinMan!
You have a very good looking and clean setup there.
Next question: How does she fly?
Re: TQ4 - Build
Posted:
Fri Nov 23, 2012 10:06 amby ThinMan
Hello kinderkram!
Tomorrow, hoppel dance the calypso, then we see more.
For better dancing the calypso, the landing tubes removable in seconds.
Later, the complete gimbal and carbon plates (2 plates with Kolloid cubes) to clip in the aluminium piece and fit with 6 knurled nuts. Changing lipo take 10 seconds. The complete assembling of this copter takes under 2 - 3 minutes.
I hope, this copter flys very well.
Thinman
Re: TK4 - Build
Posted:
Tue Nov 27, 2012 12:15 amby ThinMan
Hello!
Here a first picture of the gimbal, is a 3D-picture. Photos, if the gimbal assembled.
- Gimbal CX 730 E.jpg (43.37 KiB) Viewed 13696 times
ThinMan
Re: TK4 - Build
Posted:
Tue Nov 27, 2012 6:04 amby chschmid
What a nice gimbal ThinMan. Looks really sexy.
Best
Christof
Re: TK4 - Build
Posted:
Tue Nov 27, 2012 9:03 amby ThinMan
Hello!
Thank you. I hope, this gimbal works very good with the AQ-FC.
With standard savöx servos its weights 420 g.
ThinMan
Re: TK4 - Build
Posted:
Fri Dec 14, 2012 10:59 amby ThinMan
Hello!
Her is a new picture of my gimbal. It is almost ready:
ThinMan