TK4 - Build

Show us your flight videos and pictures of your aircrafts

TK4 - Build

Postby hoppel » Thu Nov 22, 2012 9:31 pm

Hello,

currently i build a Quad for a Customer. Here is a preview.
Hardware: Autoquad
Motor: Plettenberg

The Autoquad PCB will be modified for work with 5s LiPo's.
The frame is complete in Carbon with removable arms. The connecter
contains also the plugs for LED's.
A Camera mount is also in work.

Greets,
Andrew from Berlin

IMG_2817.JPG
IMG_2817.JPG (42.52 KiB) Viewed 2404 times

IMG_2818.JPG
IMG_2818.JPG (46.32 KiB) Viewed 2404 times

IMG_2819.JPG
IMG_2819.JPG (45.12 KiB) Viewed 2404 times

IMG_2820.JPG
IMG_2820.JPG (65.46 KiB) Viewed 2404 times

IMG_2821.JPG
IMG_2821.JPG (57.91 KiB) Viewed 2404 times

IMG_2822.JPG
IMG_2822.JPG (36.64 KiB) Viewed 2404 times

IMG_2823.JPG
IMG_2823.JPG (33.27 KiB) Viewed 2404 times
Last edited by hoppel on Fri Nov 23, 2012 11:47 am, edited 1 time in total.
hoppel
 
Posts: 1
Joined: Thu Nov 22, 2012 9:18 pm

Re: TQ4 - Build

Postby chschmid » Thu Nov 22, 2012 10:09 pm

Wow
Nice cleaen build. I love your connectors. Is that custom? What about the arm clamps/holders? What product is this?

Best
Christof
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: TQ4 - Build

Postby ThinMan » Fri Nov 23, 2012 8:19 am

Hello!

Sorry for my english.

This is my Quad and the construction ist complete from me. The connectors are 3D-printed.

The right name of this Copter is ThinKopter TK 4. I planned a Y-Okto with same connectors.

The weight of the Quadro is ca. 1400 gramms.

ThinMan
Last edited by ThinMan on Fri Nov 23, 2012 10:05 am, edited 1 time in total.
ThinMan
 
Posts: 52
Joined: Fri Nov 23, 2012 7:47 am

Re: TQ4 - Build

Postby ThinMan » Fri Nov 23, 2012 9:20 am

The weight of the frame without motors, cables and electronics is 670 gramms with steelscrews.

It is very stable.

ThinMan
ThinMan
 
Posts: 52
Joined: Fri Nov 23, 2012 7:47 am

Re: TQ4 - Build

Postby kinderkram » Fri Nov 23, 2012 10:04 am

Welcome hoppel and ThinMan!

You have a very good looking and clean setup there.
Next question: How does she fly? ;)
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Re: TQ4 - Build

Postby ThinMan » Fri Nov 23, 2012 10:06 am

Hello kinderkram!

Tomorrow, hoppel dance the calypso, then we see more.

For better dancing the calypso, the landing tubes removable in seconds.

Later, the complete gimbal and carbon plates (2 plates with Kolloid cubes) to clip in the aluminium piece and fit with 6 knurled nuts. Changing lipo take 10 seconds. The complete assembling of this copter takes under 2 - 3 minutes.

I hope, this copter flys very well.

Thinman
ThinMan
 
Posts: 52
Joined: Fri Nov 23, 2012 7:47 am

Re: TK4 - Build

Postby ThinMan » Tue Nov 27, 2012 12:15 am

Hello!

Here a first picture of the gimbal, is a 3D-picture. Photos, if the gimbal assembled.

Gimbal CX 730 E.jpg
Gimbal CX 730 E.jpg (43.37 KiB) Viewed 2271 times


ThinMan
ThinMan
 
Posts: 52
Joined: Fri Nov 23, 2012 7:47 am

Re: TK4 - Build

Postby chschmid » Tue Nov 27, 2012 6:04 am

What a nice gimbal ThinMan. Looks really sexy.

Best
Christof
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: TK4 - Build

Postby ThinMan » Tue Nov 27, 2012 9:03 am

Hello!

Thank you. I hope, this gimbal works very good with the AQ-FC.

With standard savöx servos its weights 420 g.

ThinMan
ThinMan
 
Posts: 52
Joined: Fri Nov 23, 2012 7:47 am

Re: TK4 - Build

Postby ThinMan » Fri Dec 14, 2012 10:59 am

Hello!

Her is a new picture of my gimbal. It is almost ready:

TK VID420.jpg


ThinMan
ThinMan
 
Posts: 52
Joined: Fri Nov 23, 2012 7:47 am

Next

Return to AQ Media Showcase

Who is online

Users browsing this forum: No registered users and 1 guest

cron