No Windows 10 driver for SiLabs CP210x USBtoUART

[aBUGSworstnightmare]

Hey guys,
seems like there is no Windows 10 driver for Silicon Labs CP210x USB to UART Bridge at the moment. So be careful if you decide to upgrade your Windows OS to Win 10.
After doing it I could no longer use my Flyduino USBtoUART; a FTDI FT232R works fine.

Joerg

[kinderkram]

No problems here. I recently upgraded Win7->10 just plugged in the Flyduino Stick and could use it right away.

sili.jpg (14.65 KiB) Viewed 10165 times

Driver date is 2012, version is 6.6 so it´s the Win7 driver taken.

sili2.jpg (43.12 KiB) Viewed 10165 times

Did you do a clean install of Win10 or did you upgrade a previous version where the stick already worked?

[aBUGSworstnightmare]

I've made an upgrade from Win7 Pro 64bit to Win10 Pro 64bit. The stick was working fine on Win7, but Win10 gives me a driver error.
Will have to check on different PC and also try to install Win7 driver manually.

[aBUGSworstnightmare]

Well, can not tell you what solved the problem in the end! Installed the driver (refer to attachment) re-assigned COM port # and no it's working.