PPM: can fly left and forward, not right and back.

[arachnida]

Hi,
PROBLEM SOLVED, see 3rd post.

my new AQ has a PPM Jeti Duplex Rx and I've managed to get my radio settings correct (I guess). My Pitch is going from -702/-2/+700 and Roll -702/1/+700 in the Radio Value screen. I can arm and disarm my X frame Quad without any problem so Rudder seems also to be working.

In the Radio Control window my values move from -91 to +91%.

PPM scaler 4
PPM Throttle LOW 950
PPM Channel MID 1512

When I hover I can only steer forward and left, not right nor back. I can also feel this behaviour when I hold the quad in my hand. All channels listen to Throttle control. It seems that the AQ is not reating to positive values of both channels, only negative values have an effect.

Using FW 6.6 RC76 build 1034. ESCs are Flyduino SimonK N Fet and calibrated.

Please note this is my first AQ, but I have several other OP, MK and MWii flying around with PPM only Rx.

Cheers,
Ivo

[arachnida]

I just noticed that the stabilisation, when holding the qaud in my hand, also only works in one direction on each axis.

[arachnida]

Apparently the mixer values were not written correctly into the AQ ROM. After the third try it seems to work.