Autoquad 6 public beta release

[kinderkram]

In good ole Germoney.

[plexus]

Yes , good news. I have a glance everyday on the shop !!:

[kinderkram]

Why don't you guys just use the "Notify Me" function from both shops?
http://viacopter.eu/index.php?page=shop ... &Itemid=53
http://flyduino.net/Autoquad-6-public-beta-Version_1

[plexus]

Yes I use it. But ????

[fred_fr]

[kinderkram]

There was a delay from the factory but they received yesterday and after inspections and testing they will go out next week.

[mr_westie]

Patiently waiting.
Next week as in 15th? or this week

[JussiH]

The second of the Beta run is going to be available from Viacopter and from tuesday 9th of october 18:00 CEST.

We are still in Beta, and there has been made a change to Vin sensor to make it read voltages up to 25V. (The max input with the default Recoms is still 18V). Basically the change consists of putting a 8,45K resistor on R4. This version is officially designated 6.1 R2.

A change is needed in the code:

http://autoquad.org/wiki/wiki/getting-s ... 1-r2-board.

We will also release precompiled Hex files for R1 and R2 boards.

The team is currently overhauling the Wiki and documentation, so keep an eye out on the Wiki - lots of stuff is beeing edited or overhauled these days.

Limited qty, they will be sold on a "first come, first served" basis!

If you bought a Beta board from Viacopter, you are qualified for a 10 percent rebate on a second board. Send an Email to the shop mail with your original order number to take advantage of this offer.

[fred_fr]

at 18h15 Autoquad 6 board is available from Viacopter and no from flyduino .

I bought a card 9/10/2012 receive 12/10/2012

[kinderkram]

A little more patience, please!
Flyduino will have them in stock today. If not - why not buy from Jussi? Same boards, same price, same conditions...