The second of the Beta run is going to be available from Viacopter and from tuesday 9th of october 18:00 CEST.
We are still in Beta, and there has been made a change to Vin sensor to make it read voltages up to 25V. (The max input with the default Recoms is still 18V). Basically the change consists of putting a 8,45K resistor on R4. This version is officially designated 6.1 R2.
A change is needed in the code:
http://autoquad.org/wiki/wiki/getting-s ... 1-r2-board.
We will also release precompiled Hex files for R1 and R2 boards.
The team is currently overhauling the Wiki and documentation, so keep an eye out on the Wiki - lots of stuff is beeing edited or overhauled these days.
Limited qty, they will be sold on a "first come, first served" basis!
If you bought a Beta board from Viacopter, you are qualified for a 10 percent rebate on a second board. Send an Email to the shop mail with your original order number to take advantage of this offer.