AutoQuad presentation at the Maker Faire 2013/2014/2015

Latest News and Info about the AutoQuad development

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby afernan » Mon Jul 22, 2013 10:56 am

Norbert:

I'll bring my small boxed quad. I can fly it doing a full demo. It flies really well since long time ago (has a lot of flight hours already) , not a new build.

I can make also a small demo to build up or dismount from the box in less han 10 min.

Also , I can let to flight it to a full newbie visitor (obviously close controlled by me). I use to do with friends and childrens. The way to do very safely is to perform a fully PosHold flight: take-off, fly around (with very limited stick control) and landing. This is very amazing for the people and not so risky (i'm not crazy)

Material i'll bring:
- Small quad (650gr w/o batt) with AQ
- EPP Box for the full quad set with AQ symbol + necesary tools (1 allen key)
- 4 batteries 2200, 3s
- Tx (futaba 8fg)
- Tablet Nexus-7 with aq-gcs running
- phone Nexus-4 with aq-gcs running
No charger.I hope someone can leave me batt charger in case I need.

I'll arrive Aug,1st. So i can help you the day before to prepare things. I'll send a PM with my phone

I can make presentations if needed in english, french or obviously spanish.


Angel
afernan
 
Posts: 1214
Joined: Sat Jul 07, 2012 5:24 pm
Location: Madrid, Spain

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby Cookiemonsta » Tue Jul 30, 2013 3:09 pm

Only a few days left till the BIG event :)
Can't wait to see you guys there.
Btw I'm certified in G. with my AQ since April, too :D

Glad to see you all there,

Cookie
Cookiemonsta
 
Posts: 126
Joined: Thu Apr 11, 2013 3:31 pm

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby kinderkram » Tue Jul 30, 2013 6:16 pm

@ Angel: Thx, noted - but I'd not hand out the radio to a stranger, especially to kids.
@ Monsta: You're welcome!

Here's a quick info on how to get to the faire:
http://www.hcc.de/en/aussteller/anfahrt ... aussteller

The booths can be set up at 17.00h on Friday, the indoor stand will be in the "Glashalle", the outdoor one in the park.
There's a PDF that shows the ways to the way to the Glashalle in blue:
http://www.hcc.de/clean/mediafiles/down ... YWMiO30%3D
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby chschmid » Tue Jul 30, 2013 8:58 pm

kinderkram wrote:2 more weeks to go!

I'm collecting what you guys will be bringing to the faire and what you possibly could contribute to the demonstrations and presentations. That way we can react on possible gaps.

Please send me a list of the parts you will bring - as detailed as possible, i.e. lipos, loader, connectors (Deans, XTC...), notebooks, groundstations, monitors etc.

And please mention what you could demonstrate/present there.

Thx in advance,

Norbert


Hi Norbert

I will bring chocolate for all.
I still try to pack my hexa in a box. If I succeed I will bring it. With all the downlinks. Video will be on a separate DX10t. I would need some charging device for the 4s 6000 packs with 4mm plugs.

Maybe you could send me your cell Nr. Mine is *Swiss origin*.

Cheers
Christof
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby bluuu » Tue Jul 30, 2013 9:01 pm

guys, can I bring my hexa without any problems ? I'm not going to fly (no licens for germany etc.)
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby kinderkram » Tue Jul 30, 2013 9:05 pm

chschmid wrote:
kinderkram wrote:2 more weeks to go!

I'm collecting what you guys will be bringing to the faire and what you possibly could contribute to the demonstrations and presentations. That way we can react on possible gaps.

Please send me a list of the parts you will bring - as detailed as possible, i.e. lipos, loader, connectors (Deans, XTC...), notebooks, groundstations, monitors etc.

And please mention what you could demonstrate/present there.

Thx in advance,

Norbert


Hi Norbert

I will bring chocolate for all.
I still try to pack my hexa in a box. If I succeed I will bring it. With all the downlinks. Video will be on a separate DX10t. I would need some charging device for the 4s 6000 packs with 4mm plugs.

Maybe you could send me your cell Nr. Mine is *Swiss origin*.

Cheers
Christof

That sounds great!

Sorry: I had to edit your post - I don't want to put you into risk of getting flooded by porn SMS! :lol:

Will send you mine via PM and only distribute it internally...
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby chschmid » Tue Jul 30, 2013 9:13 pm

That sounds great!

Sorry: I had to edit your post - I don't want to put you into risk of getting flooded by porn SMS! :lol:

Will send you mine via PM and only distribute it internally...


Good idea, thanks.
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby kinderkram » Tue Jul 30, 2013 9:19 pm

bluuu wrote:guys, can I bring my hexa without any problems ? I'm not going to fly (no licens for germany etc.)

Sure, bluuu.
Would be great to have you and your Hexa there! 8-)

btw: you don't need a license if your insurance covers EU territory as long as you don't fly commercially and within the limits of German laws.
We're hobbyists, tinkerers, experimentors = MAKERS, right? ;)

I only ordered my license just in case. I.e. to alarm the tower of Hannover airport and to represent the project as the responsible guy for the faire organizers if something goes wrong.

And I promise to try my best to avoid anything going wrong. :twisted:
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby bluuu » Wed Jul 31, 2013 11:08 am

allright, hotel booked :)
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: AutoQuad presentation at the Makers Faire 2013 in German

Postby kinderkram » Wed Jul 31, 2013 6:53 pm

I've received final info on the Maker Faire today(!) - and it doesn't look very promising. :(

Anyway, let's make the best out of it. I've attached relevant info as a zip file.

Norbert
Attachments
MakerFaireInfo.zip
(5.28 MiB) Downloaded 203 times
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

PreviousNext

Return to News

Who is online

Users browsing this forum: No registered users and 2 guests

cron