AutoQuad presentation at the Maker Faire 2013/2014/2015

Latest News and Info about the AutoQuad development

Re: AutoQuad presentation at the Maker Faire 2013/2014

Postby 13brv3 » Mon Aug 04, 2014 3:39 pm

Good to hear Larry. I've got an email in to Jussi to see if I can get my hands on one.

Cheers,
Rusty
13brv3
 
Posts: 152
Joined: Wed Oct 24, 2012 1:10 pm

Re: AutoQuad presentation at the Maker Faire 2013/2014

Postby kinderkram » Mon Aug 04, 2014 3:50 pm

You def. won´t regret!
It´s such a fun to play with - I went out for some waypoint missions today - and I´m totally amazed by its performance. :D
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Re: AutoQuad presentation at the Maker Faire 2013/2014

Postby 13brv3 » Mon Aug 04, 2014 10:33 pm

I initially resisted the small copters, but the more I thought about it, the more I realized that it's perfect for the current situation. This rental house has a very limited area to fly, so smaller is better. Heck I can do most of the flying inside, and maybe even some waypoints, since GPS typically works inside. Should be fun.

Rusty
13brv3
 
Posts: 152
Joined: Wed Oct 24, 2012 1:10 pm

Re: AutoQuad presentation at the Maker Faire 2013/2014

Postby Tech-Nik » Fri Aug 08, 2014 10:23 am

Hallo,

ich habe auf der letzten Maker Faire einen Micro-quadcopter bei Ihnen gesehen (Prototy?)
Ich würde diesen gerne kaufen.
Wie kann ich da dran kommen?

Danke....
Tech-Nik
 
Posts: 2
Joined: Fri Aug 08, 2014 10:12 am

Re: AutoQuad presentation at the Maker Faire 2013/2014

Postby aBUGSworstnightmare » Fri Aug 08, 2014 4:29 pm

Tech-Nik wrote:Hallo,

ich habe auf der letzten Maker Faire einen Micro-quadcopter bei Ihnen gesehen (Prototy?)
Ich würde diesen gerne kaufen.
Wie kann ich da dran kommen?

Danke....


Hi,

zur Zeit leider noch nicht! Die auf der Messe gezeigten Stücke waren Prototypen. Du wirst dich leider noch etwas gedulden müssen.

Danach werden die Copter (bzw. Flightcontroller) bei www.flyduino.net und www.viacopter.com zu kaufen sein.

Jörg
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Re: AutoQuad presentation at the Maker Faire 2013/2014

Postby Tech-Nik » Mon Aug 11, 2014 8:31 am

Ok, danke. Dann gedulde ich mich noch ...
Tech-Nik
 
Posts: 2
Joined: Fri Aug 08, 2014 10:12 am

Re: AutoQuad presentation at the Maker Faire 2013/2014

Postby kinderkram » Tue Dec 23, 2014 2:56 pm

Seasonal Greetings from our Maker Faire lady Michaela Jäger

michaela-jaeger.jpg
michaela-jaeger.jpg (51.88 KiB) Viewed 3800 times


With best wishes for our project & team. Unfortunately she will not be involved in the organization of the MF2015.

btw: there will also be a MF in Berlin 2015.
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Re: AutoQuad presentation at the Maker Faire 2013/2014/2015

Postby kinderkram » Fri Mar 06, 2015 10:18 am

FYI: Maker Faire in Hannover is on the 6th and 7th of June, 2015.

http://makerfairehannover.com/

"Call for Makers" will end on March,15th. So a bit more than a week to decide.

Just sayin`...
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Previous

Return to News

Who is online

Users browsing this forum: No registered users and 2 guests

cron